Sawing Wood – 10 Tips For Safe Wood Processing

If you want to saw wood, then you should carefully consider the topic and the risks beforehand.

Because working with the saw can be dangerous if improperly done – this is especially true if you are inexperienced in this area.

Sawing wood – This is how safe wood processing works

Below are our 10 tips for safe wood processing. These will help you avoid potential accident hazards when sawing or processing wood in general.

 

So find the ideal saw

The saw is part of the basic equipment in every workshop and also for private individuals. Today these tools are available in different forms to choose from. Which saw you choose depends on which wood you want to saw.

So there is no such thing as the ideal tool. If you are unsure about the selection, you can get advice from a specialist. In specialist shops, experts are happy to answer any questions you may have.

 

Spoiled for choice – this tool is available for working with wood

When it comes to processing wood, a distinction is made between hand and machine saws. The latter work with a cutting edge that is constantly in motion or with a saw blade that moves back and forth. A distinction is also made between pushing and pulling saws.

The majority of hand saws in Europe are pushing, with most machine saws and Japanese saws being pulling. Some saws can even be used in double-sided cutting – frost saws should be mentioned here, among other things.

When cutting, you should note that the cut must be wider than the saw blade – otherwise the saw may get caught when cutting. The saw teeth should therefore be attached in a wave form.

 

Most accidents happen with this saw

The circular saw is one of the most common accident triggers in the field of saws. Because of the high speed, it is easy for workpieces to be thrown away or carried away.

Another common cause of accidents is slipping by hand or work gloves that get caught in the saw blade. Even experienced workers underestimate these risks.

So if you are using a circular saw for the first time, you should be careful. In addition, especially as a newcomer, you must never stand alone on the saw. Adequate equipment including safety glasses is indispensable in any case.

 

This is how you prevent fraying when sawing

Before you get to work, you need to find out whether your tool is working on push or pull. You can find out by looking at the teeth.

Then you have to work away from the visible side. If you also want to prevent the wood from fraying, you can also apply an adhesive tape along the cutting line. Then you simply saw through this. The tape ensures that the wood is held together better and does not splinter.

 

First aid if the saw gets stuck

If the saw gets stuck there is also a safety risk. Because if the tool suddenly comes loose with great effort, injuries can quickly occur.

If your saw frequently gets stuck in the wood, there is a simple home remedy for it. Simply rub wax over the saw blade. The substance acts like a lubricant, which makes sawing easier.

 

Working with the chainsaw needs to be learned

Wood stoves are again very popular in many German households. This is due to the rising oil prices, which makes this type of heating an attractive option.

Many people use a chainsaw to shred firewood for the stove. If you want to work with the chainsaw, it is essential that you put on all protective equipment in advance.

Working alone with the motorized saw is also prohibited by law due to the higher risk of injury. So a second person must be at least within sight or call range.

 

Sharpen your saw regularly

The saw blade must be sharpened at regular intervals so that it is easy and safe to work with the tool. In general, this is a very complex task – each tooth has to be sharpened individually.

The matter is easier with perforated saws. This type of tool has a hole behind each tooth – making it easier to grind.

To sharpen the chain of a chainsaw, on the other hand, you need a special grinding set. Japanese saws are not ground at all – if the saw blade is blunt, you simply have to replace it.

 

Is it worth buying used tools?

If you want to try out sawing and don’t want to spend so much money, it is recommended to buy used tools. Of course you have to inform yourself in advance about the tools and quality features.

This ensures that you also have your joy with the saw. In any case, it is worth buying a used jigsaw.

The saw blades are easy to replace and are relatively cheap. However, if it is a different hand saw, you should take a close look at the saw teeth. If these are blunt, your enjoyment of the tool will be short-lived.

 

Caution should be exercised when buying a used chainsaw

A tightrope walk is the purchase of a used chain saw. You should only purchase a second-hand chainsaw if you know the owner.

Most motorized cutting tools are no longer functional after just one year of use. Therefore, before buying, you should definitely find out how the tool was serviced. The following characteristics must be considered before purchasing a chainsaw:

             The cable connections: These must be intact. Otherwise there are failures when working.

             The petrol tank: There must be no leaks on the petrol tank.

             The chain brake: This has to work properly – otherwise it can happen that the chain continues to run after the engine is switched off.

             The chain tension: It is very important that the chain lies close to the leaf. It is possible to retighten these yourself – however, a separate tool is required for this.

If you are unsure about buying a used chainsaw, you should rather visit a specialist dealer. You can also find demonstration products there at relatively low prices.

 

This is how you saw safely in the forest

If you want to get firewood from the forest, you should do this between March and November. During this time there is little water in the trunks.

Before you get to work, you also have to contact the forester – he concludes a firewood contract with you – in this you are assigned a certain amount of wood.

But always keep in mind that when sawing in the forest only wood that is already on the ground can be processed – cutting trees is simply too dangerous.

 

Conclusion – 10 tips for safe sawing of wood

If you follow these tips, you will not only work safely. This also ensures flawless results. Nevertheless, sawing wood requires a lot of practical experience. At the very beginning, you should be very careful when processing wood.

 

Leave a Comment