Makita 9564P Grinder [ 2021 Edition ]

 If among your plans you plan to acquire a hammer drill that has good power, speed management and includes rechargeable batteries, perhaps this Makita 9564p Grinder model may be ideal for you.

Main Advantage: 

One of the highlights of this Makita product is that it has a power of 1400W, so you can drill different surfaces without any problem. On the other hand, it includes 2 rechargeable batteries so you can avoid leaving half jobs.

 

Main Disadvantage: 

A disadvantage in this product is that it does not have a load meter, so you will not be able to know the percentage of its load and you should use it until it runs out.

Similar product You may also like

Main Features Explained      

Design and functions

Percussion drills are useful tools in the home since with them we can perform drilling, screwing and even permutations, so if you plan to acquire one, one of the first features that we recommend you evaluate is its design and the functions that this own

This product presented by Makita is made in high-quality plastic housing, which will provide a lightweight and sufficient strength to withstand the different vibrations of the tapping and drilling when you are using it. In addition, it has three different modes of use: drill, firing pin and screwdriver, so you can do your DIY work at home or work very effectively and without needing additional tools.

On the other hand, at its tip it has a ring of tightening torque and screwing so that you can adjust the force that the drill will exert, allowing you to select that according to the type of material on which you are going to work; starting from level 1 to 16. Also, in the ring, you can also switch between the drill modes and in its upper part, it has the speed mechanism so that you have much faster and alternate access between them.

Additionally, when you decide to use the drill mode (without firing pin) you can change the drill bit and the speed so that you can have greater fluidity depending on the type of surface you are going to drill, either a thicker one for concrete and thinner ones for wood or metal according to the depth

Another outstanding feature that has this Makita drill is that you can change the bits in a very easy and without tools, since you will need to turn its tip to open and to the opposite side to close, allowing you to make the changes without wasting time.

Power and safety 

When users seek opinions and review comparatives on the best hammer drills, another feature that is recommended not to be overlooked is the power that they are capable of exerting.

The Makita 9564P model has a power of 1400 revolutions per minute (rpm), which will allow the drill to easily penetrate different types of structures, whether cement, concrete, brick, wood or metal. However, users recommend changing the drill bit and adjusting speeds and tightening torque so you can have more effective results.

In addition, it should be mentioned that, although its powerful 2-pole motor will allow drilling almost any structure, users advise that the manufacturer’s recommendations included in the user guide should be taken into account.

On the other hand, this hammer drill has an ergonomic non-slip handle that will provide you with adequate comfort and safety when you are performing the drilling tasks, since this will not slip, which will help to significantly reduce the accidents mainly caused by the equipment electronic and DIY punzopenetrantes.

In addition to this, it has a mechanism that works under pressure that will allow you to operate the operation of the drill. That is, it works like a gun, to activate it you must press and release the button to stop it.

On its sides, it has ventilation holes that will allow the flow of air to pass so that the drill is kept in a cold state and does not heat up, which will prevent bad functions, short circuits and the expulsion of the dust generated by the perforations of the different structures. Also, you can also use an air blower and place it in the vents to remove excess dust and any other particles that may interfere with the proper functioning of the equipment.

Autonomy and accessories 

The characteristics that can influence the price of the drill you intend to acquire are the autonomy and the accessories with which it comes.

The Makita 9564P comes with 2 rechargeable 18-watt Lithium Ion batteries so you can do your DIY work without worrying too much that you can leave work halfway. In addition, it includes an 18-watt battery charger so you can charge one while using the other. However, you have to keep in mind that, you should leave it charging for approximately 60 minutes so you can enjoy a full charge.

Another aspect that should be noted is that the battery charger has a charge indicator that will show you the autonomy time of the one you are charging. Also, the duration of loading of the drill will depend on the use you give it since some users comment that they have used the equipment and have screwed more than 100 times in wood and concrete and still had a load, so you can have an average for the different jobs you plan to do.

Additionally, this hammer drill comes with a high quality sturdy plastic case with a clip closure system, which will allow you to store it neatly and prevent any heavy object that falls on it from affecting your engine’s operation; as well as you can take it with you in a very practical way when you go to work outside the home, since it has an ergonomic handle to hold it.

On the other hand, it has a chuck so you can store the pieces without worrying about being lost. In addition, it will also facilitate the exchange of these, since the hammer has an easy turning system that will allow you to make the respective change with just one hand.

Leave a Comment