Makita 5008MG Circular Saw Reviews [ 2021 Edition ]

In this article, you will enjoy the information about the Makita 5008MG circular saw reviews of 2020. If you plan to purchase a circular saw that has comfortable dimensions and an affordable price, we invite you to consider this Makita option.


Main Advantage

This is a circular saw that has a motor that works at 1800w of power, which will allow you to cut almost any type of material very easily. In addition, thanks to its ergonomic and non-slip grip you can avoid accidents.

Main Disadvantage:

One of the disadvantages that this product has is that the connection cable is a bit short, so you could have difficulties maneuvering the equipment.

Product You May Also Like

Main Features Explained

Power and speed

When looking for opinions on which circular saw to buy, an important feature that we advise you to check is the power. This detail is essential in circular saws since it is the one that will provide enough force for the team to make cuts in the materials in a fluid and efficient way without the engine being forced.

The 5008MG has a motor that is capable of working at a power of up to 1800 W, being a unit of measure of force high enough so that it can easily cut almost any type of wood, including those of more exceptional thickness without any problem. However, it should be borne in mind that, depending on the angles in which you are going to work, the allowed depth may vary; being for 45, 50 and 90 degrees about 5.7, 5.15 and 7.55 centimeters of cutting penetration as the maximum range that the team can perform in the wood. 

Therefore, so that you can take advantage of the cutting angle functions of this Makita 5008MG circular saw, we invite you not to exceed the parameters just mentioned.

On the other hand, the other characteristic that is entirely relevant and related to the power exerted by the engine is speed. In other words, a driver needs to have a speed that equals and regulates the power of the motor turns to avoid stress and to overheat in it.

This option enjoys having a maximum speed that reaches up to 5200 Rpm, and, complementing with the power of the equipment, you can make various cuts without the engine becoming too forced.

In another order of ideas, this is a circular saw that has proper speed levels and, supported by the power, will allow you to cut even the hardest types of wood.


If among the options you have in mind you want to acquire what could be one among the best circular saws, we invite you to take into account the design presented by the team before you make a choice. This feature should not be overlooked, as it is one of the most important that can be crucial in determining if the product is the one for you. That is, you have to look at the weight, dimensions and any other detail of the design that can benefit you, whether in comfort or practicality.

This circular saw from Makita is presented in a hand-held design, with cable and where it measures 2.5 meters. The equipment, in general, has dimensions of 33.2 x 24.3 x 27.7 centimeters and weighs 5.1 kilograms, so you can handle it very comfortably without having to do a lot of physical strength.

On the other hand, another highlight of this circular saw is that its grip is ergonomic, which will provide you with good levels of comfort so you can take it with your hands and do not get tired or bother you so you are several hours doing your carpentry activities. In addition, the handle also has non-slip properties, allowing you to grab the saw in a much safer way without having to worry about it slipping and you can attempt against your physical integrity, as well as avoid fatigue caused by being exposed to the vibrations and the continuous use of the equipment.

In addition to this, this equipment has a sound pressure and power of 89 and 100 dB, being relatively normal levels to be a product of semi-heavy cutting machinery, so the noise it will emit will not affect you; Otherwise, you suffer from hearing sensitivity, where we invite you to wear earmuffs to protect your ears.


Before you verify the price of a circular saw, a characteristic that is vital to evaluate in the equipment of cuts of continuous use is the materials of manufacture of the product. This factor can help you determine the resistance and the useful life of the machine since you will have to look at what it is made of and its other components to know its capacity, type of protection, and durability.

Among the models of circular saws that Makita has, the 5008MG stands out due to its manufacturing materials, and it has a magnesium casing that, in addition to protecting against impacts, also provides a lightweight. Being only 5.1 kilograms, you can lift and perform movements and cutting tasks very quickly. Besides, the equipment has a plastic finish that will protect both the engine and other internal components from damage. Being a useful aspect, this can prolong the life of the same.

On the other hand, the disk of this circular saw has dimensions of 21 centimeters in diameter, 3 centimeters of internal, has 24 teeth, is a thickness of 2.0, and is made of good quality metal, so you can perform the cutting process without it being easily damaged. In addition to this, you can comfortably replace it when its useful life is over or to cut other types of materials using an Allen key. However, you should consider the numbers, the thickness, and the steps between the teeth of the discs you intend to select so that you do not damage the wood because there are specific circular saws that provide different finishes.

Leave a Comment