Cutting Firewood With A Chainsaw

When we prepare wood for ourselves, we can significantly simplify our work using a chainsaw. The device efficiently cuts beams, branches, and stumps into smaller pieces, which can then be split using hand tools. Let’s see how to cut wood safely and quickly.

Immobilization of the cut wood

It is essential to avoid the movement of cut beams and branches. You cannot cut loose items on the ground. A similar rule applies to prune branches held by hand – it is hazardous. When preparing fuel, use a goat that provides stability to the cut elements. When buying tooling and replaceable chains, choose components recommended by the manufacturer of your saw. It is essential to remember about protective clothing – a helmet, overalls, shoes, gloves or glasses are a requirement for safety at work.

Safe posture when cutting wood

The cutting chain should be guided so that the extension of the cutting line extends outside the body of the saw operator – this reduces the risk of an accident. For this reason, among others, the chain devices have an asymmetrical structure. The cutting part is located to the right of their center. Hold the saw with both hands – the right side by the rear handle, while the left hand should rest on the front handle and give the direction of work. The body should be placed in a position that allows you to resist the strength of reflection. Never raise the saw above the shoulder line! Watch out for falling pieces of wood that should be set aside.

Watch out for jerks and reflections

The saw chain must rotate before we make contact with the wood. If we turn on a saw that is already in connection with the cut surface, the saw may jerk and break out of control. Equally dangerous are situations when they saw bounces off the beam. The reflection occurs when the device’s sword meets the object at the wrong angle or when the material being cut bends and the chain jams in the gap. Let’s always try to press the claws of the switched saw to the trunk and only then tilt the guiding sword.

Saw pressure to wood

The “claw pressure” is a kind of lever that allows the saw to penetrate into the forest. Therefore, the device does not need to be pressed down additionally. The chain should enter the beam under its weight. The faster the chain turns, the more efficient the cut. If we push it too hard, it may result in a decrease in the rotation of the saw and lower work efficiency.

Are you cutting a hedge with a chainsaw?

The practice of trimming small branches and hedges with a chainsaw is dangerous and unreasonable. Taut chapters can bounce the device towards the user. Even the rejected fragments of wood pose a severe threat. For hedge care, let’s use garden tools for pruning branches and trees. If you want to saw thicker branches, do not proceed to work without a particular course of instruction!

Working with a saw requires experience. Before we get to this task, let’s use the advice of an experienced person who will teach us how to cut wood safely. We can take, for example, courses conducted by professional and craft associations.

When we prepare wood for ourselves, we can significantly simplify our work using a chainsaw. The device efficiently cuts beams, branches, and stumps into smaller pieces, which can then be split using hand tools. Let’s see how to cut wood safely and quickly.

 

Immobilization of the cut wood

It is essential to avoid the movement of cut beams and branches. You cannot cut loose items on the ground. A similar rule applies to prune branches held by hand – it is hazardous. When preparing fuel, use a goat that provides stability to the cut elements. When buying tooling and replaceable chains, choose components recommended by the manufacturer of your saw. It is essential to remember about protective clothing – a helmet, overalls, shoes, gloves or glasses are a requirement for safety at work.

 

Safe posture when cutting wood

The cutting chain should be guided so that the extension of the cutting line extends outside the body of the saw operator – this reduces the risk of an accident. For this reason, among others, the chain devices have an asymmetrical structure. The cutting part is located to the right of their center. Hold the saw with both hands – the right side by the rear handle, while the left hand should rest on the front handle and give the direction of work. The body should be placed in a position that allows you to resist the strength of reflection. Never raise the saw above the shoulder line! Watch out for falling pieces of wood that should be set aside.

 

Watch out for jerks and reflections

The saw chain must rotate before we make contact with the wood. If we turn on a saw that is already in connection with the cut surface, the saw may jerk and break out of control. Equally dangerous are situations when they saw bounces off the beam. The reflection occurs when the device’s sword meets the object at the wrong angle or when the material being cut bends and the chain jams in the gap. Let’s always try to press the claws of the switched saw to the trunk and only then tilt the guiding sword.

 

Saw pressure to wood

The “claw pressure” is a kind of lever that allows the saw to penetrate into the forest. Therefore, the device does not need to be pressed down additionally. The chain should enter the beam under its weight. The faster the chain turns, the more efficient the cut. If we push it too hard, it may result in a decrease in the rotation of the saw and lower work efficiency.

 

Are you cutting a hedge with a chainsaw?

The practice of trimming small branches and hedges with a chainsaw is dangerous and unreasonable. Taut chapters can bounce the device towards the user. Even the rejected fragments of wood pose a severe threat. For hedge care, let’s use garden tools for pruning branches and trees. If you want to saw thicker branches, do not proceed to work without a particular course of instruction!

Working with a saw requires experience. Before we get to this task, let’s use the advice of an experienced person who will teach us how to cut wood safely. We can take, for example, courses conducted by professional and craft associations.

Leave a Comment