10 Best Bandsaw For Woodworking [ 2021 Edition ]

On many occasions, very precise cuts are needed, following patterns, to very hard materials such as wood and metal, so that they are perfectly cut, so a bandsaw is usually used due to the great power offered by this machine.

Among the best bandsaw for woodworking is the Hemsaw 782XLH Band Saw , a bandsaw ideal for cutting metal that incorporates an 850W electric motor. On the other hand, if you are looking for a model that has an ideal operation for cutting wood with a power of 230W and that reaches a high cutting speed of approximately 15 m / s, we recommend the Cevik CP28-182 band saw.

My TOP Selection

Item Name

Image

Rating

Price

4.4/5
4.4/5

The Best Bandsaw For Woodworking On The Market

If you do not have much experience with these tools and do not know what band saw to buy, we recommend you read the following section, where we mention the most prominent models of the current market.

Rank#1: DTI Diamond Laser 5000 Bandsaw

 If you are looking for a wood band saw, we recommend looking at this model with a 230W single-phase motor that allows efficient cutting work on that type of material. In addition, you can make cuts with a width of up to 20 centimeters and a maximum height of 8 centimeters.

The diameter of the pulley is 203 millimeters and reaches a cutting speed of up to 15 m / s, allowing you to comfortably cut the chosen material. This model comes with the tape already mounted, in addition to including screwdrivers, screws, and wrenches to adjust.

On the other hand, it has a weight of 15 kilograms and dimensions of 35 x 27.5 x 72 centimeters, so it is ideal to place it in a workshop. It also includes a parallel guide that will help you make the cut accurately and cleanly. This model is connected to a plug to work, so it does not work with a battery.

If you are making a comparison between the best band saws of 2020, you should be very attentive to all the highlights of this model.

Pros

Height of cut: Get a professional and clean cuts thanks to this tool with cutting height up to 80 mm.

Speed: This tool reaches a cutting speed of up to 15 m / s, allowing you to work quickly.

Motor: It incorporates an electric motor with power up to 230W that will let you work with wood easily.

Cons

Metal: This model is made specifically for cutting wood, so if you are looking for a bandsaw that cuts metal, you must choose another tool that allows you to cut that material.

Rank#2: Gryphon C-40 Band Saw

 This wood band saw is among the cheapest alternatives on this list but offers good cutting results thanks to its high-performance 350W power motor.

On the other hand, it has a work surface of 30 x 30 centimeters that can be tilted up to 45 degrees to achieve specific cuts. Also, with this tool, you can make cuts with a maximum height of 90 millimeters and supports cutting thicknesses of up to 23.3 centimeters.

This equipment generates a noise level of 67 dB and has a power cable of 2.15 meters. In addition, it has an IP20 protection class, reaches a speed of 415 RPM and the dimensions of the saw belt are 1570 x 6 millimeters.

If you are interested in choosing the best quality-price bandsaw, we recommend you to look carefully at the positive and negative characteristics of this complete model.

 

Pros

Height of cut: With this tool, you can easily cut a variety of materials thanks to its cutting height of up to 90 millimeters.

Width: It also offers a cutting width of 233 millimeters that allows working with various objects.

Speed: Thanks to its powerful motor, this bandsaw achieves a speed of 415 RPM or 12.7 m / s.

Cons

Autonomy: This saw works by connecting it to an outlet, so, if you are looking for a model that gives you autonomy, the ideal for you would be to acquire one with a battery.

Rank#3: Makita LB1200F

This band saw Makita stands out for its professional operation thanks to the powerful 900W motor and powered with 230V. In addition, it includes four models of spare blades that are easy to replace and with which you can cut different types of materials.

This product has approximate dimensions of 77.5 x 61.5 x 160 centimeters and weighs about 81.2 kilograms, so it is advisable to look carefully at the place where you are going to install it.

It has a modern design with a resistant and professional tool look in black, blue and silver colors. It is an ideal product for users who require the best performance when performing cutting work on a wide variety of materials.

If you are not sure which is the best bandsaw for woodworking, it is very important that you make sure you know the most important functions of each model, so we will present later the positive and negative aspects of this.

Pros

Power: This tool stands out for its powerful 900W electric motor, which allows you to perform optimal work.

Accessories: With the purchase of this product, you will receive 4 replacement sheets, which have a different function.

Versatile: You can cut different types of materials such as metal and wood, so it is professional equipment.

Cons

Vibration: This band saw can vibrate a bit when it is in operation, so you should make sure you place the tool on a flat surface.

Rank#4: Bosch GCB10-5 Deep-Cut Band Saw

Bosch is considered the best brand of band saws thanks to the benefits offered by its products. This band saw has a blade of 73.3 centimeters in length and depth of cut of up to 63.5 millimeters.

Its lightweight of approximately 3.38 kilograms will allow you to move easily and take this tool anywhere. In addition, this metal band saw includes a case to perform this task.

You can make repairs with this tool in your home or the workshop thanks to the working speed of its electric motor of up to 162 RPM and powered by a 4.0 Ah 18-volt Li-ion battery.

To choose the best bandsaw for woodworking of the moment, consider the use that you are going to give it and look at the important characteristics of each model. Here are the pros and cons of this bandsaw.

Pros

Mobility: This is one of the most compact models on this list, in addition to being a very light device, weighing only 3.8 kilograms, so you can carry this saw comfortably and without running out.

Blade length: This saw has a blade with a total length of 73.3 centimeters, which will allow you to cut good-sized objects.

Depth of Cut: Although it has a small footprint, it offers excellent cutting depth up to 63.5 mm.

Cons

Utility: It can be a limited utility tool, so, depending on the work you are doing, you should look at another model if you need more power.

The Hemsaw 782XLH Band Saw stands out for its electric cable motor, powered by 230V and 850W of power with two speeds, which allows you to do the job effectively. In addition, it is one of the most compact saws with dimensions of 35 x 55 x 50 centimeters and weighs 7.71 kilograms.

This product includes a replacement and cleaning kit for the cutting blade, so you can keep the tool in a better condition.

You can work metallic materials of the rectangular shape of 105 x 93 millimeters, circular of 105 millimeters in diameters and 102 millimeters in squares. On the other hand, with an inclination of 45 degrees, you have the possibility of working with materials of 70 x 60 mm, 72 mm and 68 mm.

If you are interested in acquiring the best bandsaw for woodworking, you need to know all the negative and positive functions of this and each model in the list.

Pros

Power: This tool is equipped with an 850W motor that offers efficient operation and two speeds.

Kit: This product includes a replacement and cleaning blade kit that will help you keep the saw’s life much better and longer.

Weight: Thanks to the reduced weight of 7.71 kilograms, you can easily move this tool to work anywhere.

Material: This model is specially designed to cut metal thanks to its powerful motor.

Cons

Warm-up: When in operation, the engine of this tool can get quite hot.

Rank#6: Bosch Bare-Tool BSH180B

 It may be that, in your case, what you need is a professional saw due to the hardness of the material that you must cut, so we recommend you to look at this Bosch Bare-Tool

saw of great power and precision. This model is equipped with a silent 900W motor powered by 230V.

This model stands out for having a smooth and controlled ride thanks to its rubber-coated steering wheel. It incorporates a practical guide of precision composed by three rollers HSS completely adjustable.

You can make precise and inclined cuts thanks to its 560 x 400 mm worktable tiltable from 0 to 45 degrees. On the other hand, it has a quick clamping lever that allows maintenance work and blade change without any tools.

A good option is to choose a model that gives you professional results. This ensures you can work with any material. Take into account the advantages and disadvantages of this model to make a better decision.

Pros

Height: A powerful tool with which you can work with materials up to 170 mm high to make the cut.

Width: In the same direction, this tool has a cutting width of up to 307 mm.

Speed: It incorporates a powerful motor that allows reaching a cutting speed of up to 410 or 880 m / min.

Cons

Price: Like any professional tool, this band saw model has one of the highest prices on this list. However, its quality makes it worthwhile.

Rank#7: WEN Metal-Cutting Benchtop Band Saw

Known as tools that offer a lot of quality at very affordable prices, the WEN Metal-Cutting Benchtop Band Saw stand out in the market. This WEN Metal-Cutting Benchtop band saw is equipped with a motor with 250W power and 1,400 RPM speed.

Work comfortably thanks to its 300 x 300 mm tiltable work table, and you can avoid heating with this friction-free tool.

On the other hand, it has a band of saw of 1400 x 7 mm and, thanks to the inclination of the table of work until the 45 degrees, you will be able to obtain cuts with a maximum height of 45 mm. It has a cutting guide that will help you make straight and precise cuts.

If you are looking for one of the cheapest and most efficient models on the market, it is important that you take into account all aspects of each saw. This model has a series of positive and negative characteristics that make it a good purchase option.

Pros

Push Stick: This equipment incorporates an insert lever that helps to perform a safe work with the band saws.

Guide: Get the best results with this tool, as it has a practical guide that will help you achieve a straight and precise cut.

Stabilizer: It has a fully adjustable blade stabilization system that greatly reduces vibration.

Cons

DIY: This tool is ideal for DIY jobs, so if you are looking for a model that allows you to do professional work, we recommend choosing another product.

Bandsaw Accessories

DEWALT Portable Band Saw Blade

If you have a wood band saw and you need to make the replacement of the cutting blade, it is important that you make sure to look carefully at what type of material you are going to cut and if the product is compatible with your tool, since each blade is designed to cut certain type of material.

These wood band saw blades are compatible with the band saws models TC-SB 305 U, 200, 200/1, BS 200, YPL 202 and BM 200 and their measurements are 1,400 x 7 x 27 mm. This product has 6 teeth of 25 millimeters and weighs approximately 18.1 grams.

Guide to Compare Band Saws

Choosing an efficient bandsaw that fits your needs perfectly implies that you take into account a series of recommendations and suggestions before making your purchase. Mainly, band saws are classified into two main types: band saws for wood cutting and metal cutting, so it is essential to know what type of material you are going to work on. In addition, given the different alternatives offered by the market, it is important that you consider a number of aspects and characteristics before making your choice. That is why we have taken the initiative to make this guide to buy the best bandsaw for woodworking and thus be able to help you make a good purchase. 

Shopping guide

Type and model of engine

In any comparison of band saws, the engine plays a key role when choosing a new tool, so it is an aspect that you should take into account first, since, obviously, this component will determine the quality and working power You have to ask yourself if you need to cut wood or metal, in addition to knowing how often you will use this tool since it is not the same to cut several times a day or a couple of times throughout the month. However, the engine power directly affects the price of the device, so if you are looking for a good and economical alternative, look closely at this aspect.

To work with hard materials, you may need an engine of 1 or more horsepower. On the other hand, for simple DIY jobs, choosing a model from 0.5 to 0.75 horsepower may be enough. Keep in mind that motors tend to work more when they are less powerful, in addition to warming more of the account due to friction, affecting the components of the tool. If your job is to do at home in DIY tasks, with a low power engine will be enough. However, if your job is to work hard materials professionally, it is advisable to invest in a more powerful engine. If you are interested in knowing how much the bandsaw costs, look at this aspect before choosing.

The frame of the saw

It is known as the frame of the band saw the piece that is responsible for holding together all other internal components of the tool. It considers that a team with the frame made of wood or plastic, in addition to being lighter and less resistant, will easily support itself if the pulleys that it incorporates are too large and with weight. Professionals recommend that, for frames made of plastic, the pulleys used should not exceed 12 inches, since any larger pulley will be too heavy for these types of frames.

On the other hand, there are frames made of cast iron, which are much heavier and stronger than plastic or wood models. As a recommendation given by professionals, make sure that the metal sheet of the frame has at least one double layer or, failing that, two frames that are separated. In addition, it is advisable to look very well at the size of the sheet and its weight, since the heavier the frame, the greater the precision and cleanliness of the resulting cuts.

Blade Guides

Another factor that you should not overlook is the guide, which will allow you to make a straight and precise cut following a pattern, ideal for series work. Keep in mind that the blades of this type of tool differ from the rigid and solid traditional blades because they are completely flexible, so to maintain a clean-cut the cutting guides are used at each end of the machine. The thrust bearing is installed at the rear of the belt and is the one that is responsible for preventing the belt from moving while the wood moves.

Both thrust bearings and guides are usually made of metal. In addition, they have two guide blocks, one above the table and the other below. Many professionals and experienced users replace the guides made of metal with other parts such as synthetic laminate blocks with a graphite plate, which generates a much lower level of friction, preventing the tool from getting hot.

Frequently asked questions

Q1: How to make a homemade bandsaw?

More handyman users have developed a way to make a homemade bandsaw using 3D modeling software such as SketchUp, which will help you get an idea of how the design you have in mind will look. Even in the network, you can find ready-made patterns to manufacture the structure of the saw. For this project, birch plywood sheets, MDF, are used, which must be cut following the patterns and, finally, they are assembled together like a puzzle in the way that would indicate the plane with the design used.

Q2: How to sharpen bandsaw?

There are several ways or procedures to sharpen a bandsaw without having to disassemble and remove it from the machine so that it is an activity that you can do yourself when convenient. Keep in mind that on the network you will easily find step-by-step instructions that you can follow in case it becomes difficult for you. One of the procedures most used by users is entirely at hand and is carried out using some guide blocks together with a file. Another of the manual methods of sharpening of saws of band saws more realized is using an economic polisher that uses a disk of 4 inches.

Q3: How to tension a bandsaw?

Most models of band saws incorporate a small knob or screw that is responsible for adjusting the tension in the lower and upper part of the tool. It is important to make sure that the blade is tight enough so that it does not slip or deflect when you make the cut, however, if you tighten the saw blade more than the bill, you run the risk of damaging the tool motor in its whole. The way to know if the tension is right is to raise the blade guide to a maximum height and press on both sides of it. It should move approximately 3 mm when a certain amount of pressure is applied.

Q4: What materials can be cut with Metabo bandsaw?

The band saws of the Metabo brand stand out for offering a very efficient operation against materials such as wood since they incorporate a fully adjustable three-roller HSS guide system that adjusts the blade at the top and bottom, which helps you to preserve a higher level of precision in your cuts.

Q5: How to make circles with a bandsaw?

First, you must calculate the required distance. For example, if you have to cut a circle of 60 cm, you will have to use a distance of 30 cm that goes from the center of the piece to the end. When you reach some point of the guide that you have previously marked in a circle, turn on the tool and begin to carefully travel the guide until it reaches the end.

 

How To Use A Bandsaw

 

Band saws are presented as an excellent alternative when you need a tool that helps you cut very hard materials such as wood or metal and following a pattern to do it in series. Although you know the use of traditional saws perfectly, it is important that you read a couple of tips that help you use this tool correctly and you can avoid any problems or even possible accidents. Below, we briefly explain how you can use your new bandsaw.

Initial settings

It is highly recommended to invest the time necessary to look at the instructions that the factory provides with the purchase of the tool, in addition to the safety information that is often included with this type of product. Remember to adjust the saw to a comfortable height to perform the cutting work. Many users think that just above the waist is a comfortable height.

Choose the correct sheet and its tension

Keep in mind that each project uses a specific type of sheet, so there are two criteria when making this distinction: teeth per DPP inches and blade width. The DPP is a value that is responsible for determining the effect and quality of the cut on the material you are working on. The higher the number of DPPs, the cut will be much smoother, but will do the job of cutting with a smaller range. However, the lower the DPP, the cut will be much rougher, although it will be done much faster.

Next, adjust the blade tension following the manufacturer’s instructions. Generally, this type of tool incorporates a screw or knob that allows you to easily adjust the tension. Remember that, so that the blade does not slip or deflect while cutting, you must make a precise adjustment. One way to know if the tension is adjusted correctly is to raise the blade guide to maximum height and then press with your fingers, applying a little pressure, to the sides of it. When doing this, the blade should move by about 3 mm.

Adjust the table

To make a square-shaped cut perpendicular to the table, you can use a wooden block to check the alignment of the sheet visually. In addition, if your bandsaw is previously set with the angle indicator at 0, you can vary this value to the inclination that your particular equipment allows.

Mark, connect and cut

Before you start cutting with your new bandsaw, make sure you have the shape you are going to work in, so that the guide can help guide you in cutting. You can mark the drawing on the piece of wood that you are going to use clearly with a pencil or marker. Make sure you have enough space to move while making the cut. Proceed to connect the equipment and turn on the saw. In the end, be sure to disconnect the saw from the power outlet to avoid any accidents.

All You Need To Know About Bnad Saw

What is a band saw?

 A band saw is one of the electric saws, which differs from conventional models such as a scroll saw, circular, or jigsaw by a saw blade made from a closed band. This saw blade on the band is driven by a motor. It lies in the form of a band around two deflection rollers and thus enables continuous sawing. Most band saws are operated stationary. These saws have their origin in the Woodworking. In sawmills these run bandsaws both horizontally and vertically. In the Joiner also be smaller models used. What is striking in this case is the closed housing, in which the saw blade also rotates in a protected manner. In the front saw area we find a support table on which the material to be sawn can be placed and fastened.

A get rip fence we have a straight saw cut.

“Always remember to check the warranty period. It says a lot about the quality of the machine.”

 

Which band saw is the best?

Our TUV-certified consumer portal has tried to find out which band saw is the best for most users. Is it Scheppach, Metabo, Makita, Einhell, Proxxon, or Record Power? And which model is the test winner?

 

 

For this we first compared the product details. Various factors are important, such as the cutting speed, cutting height, table size, saw band length, and passage height. Deflection pulleys and rip fence should also be available.

“Record and Holzstar are popular brands of band saws.”

 

Regarding the material to be processed, we mainly focused on wood in our band saw test. However, we rated it positively if plastic and metal can also be sawn. As external tests have shown, even the inexpensive Einhell TC-SB (thin) aluminum sheet creates easily and precisely.

How clean the different band saws work, whether they are stable and easy to use, has been determined by evaluating various external practice tests. For this, we evaluated tests and reviews from various trade journals and tool testers. We also analyzed the customer ratings.

You have to say that band saws are not top sellers on Amazon and the reviews are therefore limited and the TOOLSITEM before not too meaningful. The Makita BLB1200F, for example, got off very well in a product test on YouTube, some now write on Amazon that this band saw is terrible. Absolutely shaky and just dirty cuts. Other buyers, however, are very enthusiastic. Our consumer portal tries to clarify the contradictions here.

The price is also important. While Einhell is quite the cheapest branded product, Metabo, Record Power, and Metabo are much more expensive. Scheppach is in the middle.

 

How does a band saw work?

The saws from our band saw test can be used in a variety of ways. With these saws not only straight saw cuts are possible, but also curved and even circular cuts.

“Warning! The saw band must never be too loose. Otherwise it can slip off the rollers!”

The saws are driven by a powerful electric motor. In the domestic as well as manual sector , 230 volts are completely sufficient for this.

The saws presented here from a  test have a vertically running saw blade . Here, the welded endless saw blade with different toothing is driven by two wheels or

Deflected pulleys. Ultimately, an uninterrupted, endless saw cut is possible.

With a normal saw blade, for example

  • Wood,
  • Metal,
  • Plastic,
  • Leather,
  • AAC, but also
  • frozen meat and bones

The saw blades with a diamond coating are of significantly higher quality . These achieve a cut edge in perfect grinding quality during the saw cut. With such special saw blades, we can

  • GRP,
  • Graphite,
  • Catalysts,
  • Plastinates and
  • Glass

High-quality table band saws for home use are equipped with balanced guide rollers. This ensures a vibration-free belt run and the saw cut achieves its highest accuracy. Various angles can be set using the integrated work table. A height adjustment of the cutting limit can also be set without tools.

 

Advantages & application areas from one test

In our band saw comparison, TOOLSITEM does not want to withhold from you what such an electric saw can be used for. Such saws are ideal for woodworking. For our best list we have the test results of external tests and the evaluated customer reviews. We also analyzed the reviews of various craftsmen on YouTube, who often receive a band saw for a test. Sometimes you also report on their many years of experience. The most meaningful is a band saw a test of course when several band saws are compared directly and the testers subject several saws to different test criteria. it often comes down to precise and difficult saw cuts . Especially in joinery, individual components made of different materials such as wood, plastic, or metal have to fit together with millimeter precision.

 You can easily saw straight cuts and curves with a band saw. This works much faster than if you were using a manual saw, such as a Japanese or fretsaw. Although you can also use a scroll saw on very softwood, hardwood looks different.

A band saw can saw beech, oak, and maple particularly precisely. In general, it doesn’t matter whether you want to saw a shelf for a cupboard or cut out the outlines for a long or skateboard . Anything is possible with a saw.

These saws are in demand even in the metalworking industry . With a corresponding blade can therefore metal parts in form bring.

The benefits of a band saw test

  • extremely precise saw cuts,
  • integrated guide rails,
  • lossless sawing through very thin saw blades,
  • Variety of materials that can be sHOwn and
  • Round cuts possible.

What types of band saws are there?

Before you are interested in a   band saw test winner, we would like to introduce the different types of band saw to you and also discuss the possible advantages and disadvantages.

The modern band saw

Today’s band saws for workshop and home use are offered as free-standing and table devices.

You can easily weigh up to 100 kg.

The narrow rectangular shape is particularly striking with these saws. In the chassis is not only drive motor hidden, but also the circulating endless saw blade. This vertical saw blade only appears at the front in a certain length. The saw table and controls are also located in this area.

Advantages:

  • high sawing power,
  • Saw table with guide rails for cross and rip sawing,
  • Round cuts possible,
  • partially integrated suction device,
  • solid build quality.

Disadvantage:

  • take up a lot of space,
  • correct saw blade adjustment is not always easy,
  • sometimes quite expensive.

The mini band saw

So-called mini band saws are also offered especially for model making. Here, for example, the renowned brand manufacturer Proxxon can offer innovative saws that are designed as table-top devices.

Clearance height and reach and the size of the work table are indeed designed to be substantially smaller than in the big saws, but it is also about very fine sawing.

 With these compact table band saws, a wide variety of materials can be sawed with particular care. They are indispensable for ambitious model making. The saw cut is so clean that it does not have to be reworked later.

Benefits from a test:

  • precise sawing result,
  • ideal for model builders,
  • Longitudinal and round cuts possible
  • partially integrated suction device,
  • high-quality workmanship.

Disadvantages from a test:

  • Not always easy to use
  • relatively expensive.

 

The metal band saw

In certain cases, stainless steel, iron, copper, and aluminum have to be sawn. There are special metal band saws for this. It is mostly heavy table devices that are equipped with a diamond saw blade.

 The biggest difference to the other models is that the saw blade rotates in the horizontal direction.

For this, we can only saw metals and no other materials with these saws . As an external band saw test has shown, most band saws can also cut aluminum sheet. Even the Einhell TC-SB for only around 100 euros should do this without any problems.

Benefits from a test:

  • suitable for all metals,
  • high sawing power,
  • perfect sawing result,
  • high-quality workmanship.

Disadvantages from a test:

  • usable only for metals,
  • relatively expensive.

The horizontal band saw

For the sake of completeness, we would also like to mention the large horizontal saws from a  band saw test 2020.

This also includes the block band saws used in sawmills.

They can be used to reliably saw logs in order to extract wooden boards from them.

These saws are usually very large and heavy.

Benefits from a test:

  • professional band saw for industrial use,
  • high sawing power,
  • perfect sawing result,
  • high-quality workmanship.

Disadvantages from a test:

  • can only be used for metal and plastic or only for wood,

The band saws tested criteria 

Below we would like to introduce you to the most important test criteria from various tests so that you can get an idea of which band saw may be the right one for you. Important criteria are cutting height, passage height, and saw band length and cutting speed.

The cutting height

An important test criterion for a band saw is its cutting height in every test. This indicates how strong a board can be that is to be sawn. Band saws usually cover an area between 8 and 24 cm. While the mini band saws for model making offer a cutting height of 8 cm, large standing band saws even reach a cutting height of 24 cm. This means that we can also use it to cut aerated concrete blocks with ease. Average should a band saw at least 12 cm of have cutting height. This means that they are adequately dimensioned in the DIY sector for most purposes.

The passage height

With a stationary band saw, it is important to know how big the workpiece to be sawed can be. Similar to the size of the plywood board for a manual fret saw, the passage height indicates how long and wide a board or beam can be so that it can still be placed on the work table and sawed.

Large band saws can reach a passage height of 24.5 cm here. This is usually only required on the construction site. A passage height of 15 to 20 cm is completely sufficient for model making or most domestic sawing work. The band saws tested in various tests meet these requirements.

The saw band length

Each saw needs an endless saw blade, the so-called saw band, to operate properly. Due to the design, most saws differ. They have structures of different heights, which already indicates that the rotating saw bands are also of different lengths.

Band saws are actually designed for endless sawing. However, over time, the saw band became dull in the tests and had to be replaced. During the practical test, attention is always paid to the correct saw blade length. It should not be left unmentioned that a saw with a very long saw band could ultimately also be used longer in all tests because the wear had less impact in tests over a corresponding length.

The saw band lengths generally range from 106.5 cm to 263 cm. If such a saw band needs to be replaced, you should ideally always get a replacement blade from the same manufacturer.

 

What do I need to pay attention to when purchasing?

We would also like to give you the following purchase criteria for band saws so that you can easily find the right saw for you.

The machine performance

In electric tools electric plays input power an important role. This indicates how much electricity such a device can consume. With this information you can determine the actual power consumption of a power tool, but ultimately you cannot draw any conclusions about its performance.

Conventional band saws for home use have a power between 300 and 400 watts. In the model making area, the mini band saws have an output of only 85 watts. Large stationary saws sometimes come to 1,500 watts.

In a test, a stationary band saw with 1,500 watts was convincing in terms of sawing power, cutting, and passage height. However, there are also less powerful saws that can do their sawing work extremely efficiently. Therefore, do not pay attention to the wattage alone when buying.

“Even as a hobby craftsman, only use a band saw with which precise work is possible. Because, as I always say, no good workpiece without good tools.”

 

 

The cutting speed

  • With many saws, the cutting speed can be individually adjusted to your own needs. The belt or cutting speed indicates how many meters of wood or metal can be sawn in a second. This criterion can be very important if a band saw is in continuous use and high throughput is important here.
  • In industry and craft businesses, in particular, slow belt speeds can affect work. Band saws for model making, for example, reach around 5.5 m / s, while the entry-level models for home use reach just under 15 m / s. come. The large stationary band saws achieve a cutting speed of up to 820 m / s.

 

The table size

  • The table size should not go unmentioned. Many electric saws are equipped with a work or saw table on which the workpiece can be positioned and fixed. In the case of band saws, the work table usually has a square shape. The table size is usually between 20 x 20 cm table size and 50 x 50 cm table size.
  • The size of the saw is also decisive here. Large work tables are advantageous so that you can also place larger workpieces on them. However, make sure that in this case the passage height and the cutting height must always be taken into account.

               

The tools

  • When purchasing a band saw, it may be important that the workpieces not only can be securely attached to the work table but can also be guided safely. In this case, such a table should be provided with at least one rip fence. However, since both longitudinal and cross-sections can be performed with a band saw, such guide rails should be available for every sawing direction.
  • It is important that such a rip fence can be removed if necessary, if we want to, for example, saw out a rounding. You can often tell from the outer packaging of a band saw whether these features are included. There is usually a product image, which also shows the saw table.

 

Brief information on leading manufacturers

A wide variety of saws are available on the market. We would like to provide you with a brief overview of the best-known manufacturers who also have such saws in their product range.

“As always, I give my brand tip for the best: Take a look at the band saws from Einhell! You won’t regret it!”

 

Proxxon

The German PROXXON GmbH with headquarters in Föhren has been producing fine tools for more than 30 years. These are primarily needed for engraving work and for model making. The product range includes many different precision power tools, such as lathes, mini grinders, electric saws, including the Proxxon band saws.

The so-called Proxxon micro band saws are equipped with a robust die-cast aluminum housing. With the double ball-bearing deflection rollers, a particularly high sawing performance is achieved, with only very little wear. These precision saws are primarily aimed at model builders who need the finest sawing work. These functional saws are in the upper price segment.

Record power

  • For its high-quality power tools is the British Record Power Ltd. Headquartered at Centenary House, 11 Midland Way, Barlborough Links, Chesterfield, Derbyshire. The company specializes in various woodworking solutions. Here you will find, for example, lathes, bench drills, circular saws, and much more. Of course, high-quality band saws should not be missing.
  • Record Power band saws come in several performance classes. In addition to table band saws, stationary models are also offered here, which can weigh up to 100 kg. The sawing performance of these band saws is correspondingly high. As a rule, these models achieve a very large cutting height and also a large passage height. They can easily be used in the professional field. Record Power band saws also achieve top values in terms of cutting speed. These models are in the upper to higher price segment

The best-known models include the Record Power BS250 and the Record Power BS300E.

Scheppach

The Scheppach label hides the German Scheppach fabrication of woodworking machinery GmbH with its headquarters in Ichenhausen. Since 1927 are of woodworking machinery Scheppach made. Here you will find high-quality circular saws, chainsaws, wood splitters, choppers, lawnmowers, but also compressors and power generators. Scheppach also produces powerful band saws.

Scheppach’s best-known band saws include the Scheppach HBS261 and ScheppachHBS20 .

The band saws from Scheppach are characterized by a high processing quality. These models are suitable for all do-it-yourself work, model builders, but also in professional craft businesses. Scheppach band saws achieve perfect sawing results even with low wattage. Even particularly hardwoods can be cut with such a band saw. Unfortunately, these professional band saws are in the higher price segment.

 

Varo

The Dutchman Vic Van Rompuy once founded a hardware and household wholesale company near Antwerp in 1958. This gave rise to the well-known machine tool manufacturer Varo. The company is now one of the leading international manufacturers of garden tools, machine tools, power generators, compressors, and complete workshop equipment. Varo also produces innovative band saws.

Varo band saws in the PowerPlus series impress with their solid build quality. Despite their compact dimensions, these band saws can be used very flexibly for all longitudinal and cross-sections. Almost all materials can be sawed very reliably with the appropriate saw band. The user has several parallel stops and other fastening options to choose from on the work table. These band saws are primarily aimed at DIY enthusiasts and model makers. Varo band saws are in the lower to medium price range.

Metabo

The German Metabo GmbH based in Nürtingen is internationally known for its high-quality power tools . The company, founded in 1920 , is considered the inventor of the hand drill. A large number of power tools, such as electric drills, circular saws, angle grinders, cordless drills and band saws, are now manufactured.

Metabo band saws are available in many different versions. These robust and functional saws are reliable helpers in domestic and commercial areas. With their many setting options, workpieces can be sawn individually and precisely. You can find these band saws from Metabo in the upper price segment.

The best-known model is the band saw Metabo BAS 261 . Although it costs about double the Scheppach HBS261, many buyers think that the Metabo BAS 261 is worth it. On Amazon, 32 buyers gave an average of 4.2 stars for the Metabo BAS 261. The stable stand and good sawing performance are praised. According to customer reviews, the Metabo BAS 261 is not only suitable for hobbyists but would also be just the thing for demanding tinkerers. However, the Metabo BAS 261 arrived at a buyer already damaged.

Einhell

The Einhell Germany AG is a German manufacturer of power tools and garden equipment. The hallmark of Einhell devices is the bright red color. The price of the tools is often in the lower range, which makes them particularly popular for hobby craftsmen.

As our evaluation of customer reviews on the various Einhell products (from lawnmowers to cordless screwdrivers) shows, there are many who label Einhell as “cheap products”. On the other hand, Einhell also has a large fan base. Tool testers such as the “HolzHeini” with its well-known YouTube channel are also avowed fans of Einhell products. At the StiftungWarentest, Einhell products also often make it into the front half and can often score far ahead of high-priced devices.

Einhell’s best-known band saw is the Einhell TC-SB 200/1. On Amazon it is “Amazon’s Choice” for “band saw”. The Einhell TC-SB only costs around 100 euros and was rated 3.9 stars by 44 buyers. What is striking about the ratings is that most give 3 or 4 stars. They are happy (for the price) but make some cutbacks. Otherwise, it is often the case that some are completely enthusiastic and other buyers are completely disappointed.

With the Einhell TC-SB 200/1, buyers confirm that the saw can be used to cut wood and even aluminum sheet properly. The operating instructions are criticized by many, but the Einhell TC-SB 200/1 band saw is very stable. The rip fence also seems to work.

Conclusion: the band saw Einhell TC-SB is a proper band saw for hobby craftsmen who do not want to spend too much money and can also find their way around with a laborious manual.

Makita

Makita is a Japanese manufacturer that has become very popular in recent years. Both Makita power tools (especially cordless drills) and garden tools are characterized by their high quality. The turquoise color scheme is striking. The Makita BLB 1200F is particularly well known among band saws.

 

Internet vs. Specialist trade: where is the best place to buy my saw?

 You may be wondering where you can best buy the right saw. You have several options for this.

First of all, you can buy such a saw from local specialist shops. Here the hardware stores and power tool shops are literally appropriate.

But we also want to show that ordering a band saw online can not be wrong. The following comparison should show the advantages and disadvantages of both options.

“When buying a band saw, I pay attention to the cutting speed, the passage height, and the table size.”

 

Buy a modern saw from local retailers

Most hardware stores are in front of the city. Although they offer sufficient parking facilities, they always have to be approached with difficulty. Especially on weekends, many want to experience the ultimate shopping experience here, so that the DIY superstores and garden centers are quickly overcrowded. You will rarely find a seller here, who you can ask for a band saw.

Unfortunately, it is so that in many hardware stores, the shop assistants and retailers not particularly good with power tools familiar. Ultimately, they do n’t know much more than what the packaging says.

Of course there are exceptions, but unfortunately these are hardly to be found when visiting a hardware store.

You should be careful of overzealous sellers. They really want to sell you a band saw. It may well be that this is a shop keeper or even a discontinued model. In some cases, customers are also attracted to discounts. At home, the saw turns out to be not a good choice. Either operation is too difficult or there are no reasonable accessories for this.

It becomes difficult when you try to bring back such a saw. Not every retailer is so accommodating and takes back the goods for a purchase price refund.

We would like to list the advantages and disadvantages briefly and clearly.

Advantages when shopping in local specialist shops

  • You can inspect the existing band saws,
  • You may receive sales advice,
  • You can take the purchased band saw home with you immediately.

Disadvantages when shopping in the local specialist trade

  • You have to drive to the hardware store first,
  • the markets are very crowded, especially on weekends,
  • a seller doesn’t always have time for you
  • the choice is usually limited,
  • you will hardly find a band saw test winner there,
  • the prices can be higher on-site,
  • it is not so easy to return the saw if you don’t like it.

 

Order a saw online

There are many good reasons for a band saw on the Internet to order. First of all, you can conveniently place an online order around the clock from home. You are not bound to any shop opening hours. You can order a saw even on Sundays and public holidays.

You have the largest selection on the Internet. You can also benefit from the best prices here. The ordering process is extremely simple. The payment process can also be described as very secure.

Long delivery times are also a thing of the past. In the meantime, you can even have your new band saw delivered within 24 hours.

We think it’s nice that you have a right to withdraw. If you do not like the saw you have ordered, you can send it back to the supplier without giving any reason. You will then be reimbursed for your purchase price. Below we want to briefly list the advantages and disadvantages for you.

Advantages of ordering from a test online

  • elaborate directions are not necessary
  • benefit from very reasonable prices,
  • you have the largest selection on the Internet,
  • short delivery time,
  • shopping around the clock,
  • Right of withdrawal if you don’t like it.

Disadvantages of ordering from a test online

  • longer delivery times are relatively rare,
  • you have to do without personal sales advice,
  • You cannot take the band saw home immediately.

Taking into account the advantages and disadvantages, we can only recommend ordering a band saw online via the Internet. Here you can also go to number safe if you choose a  band saws winner interest.

Interesting facts & advice

In our band saw guide, we would like to explain all the points that we have not yet communicated to you. Perhaps you can use this information to find the right saw for your needs.

“My tip: don’t save on the price of the band knife.”

 

 

The history of the band saw

The first hacksaws were most likely first 4,700 years BC. BC developed in ancient Egypt . These saws were made of bronze at the time .

 Manual saws have continued to improve throughout history. The Romans had a great influence on the development, with their tool knowledge demonstrating their initial superiority over other peoples.

Saws were later operated using hydropower. Around 1204 AD there were the first sawmills that sawed the wood in large style for buildings, the art of war, and ships.

At the time of industrialization , the mechanical saws were finally powered by steam. The development of the first band saw was still going on. So far it has been extremely difficult to find a suitable metal alloy for the bending saw band.

It wasn’t until 1855 that the first band saw was presented to the public at the Paris World’s Fair .

These were reminiscent of the table band saws in the joinery known until today. It then took another 20 years before the table band saw was developed into the functional block band saw.

Numbers, data, facts about the band saw

In our table band saw comparison, we would like to give you the most important data, facts, and figures so that you can possibly use this information in your purchase decision.

Note weight and low vibration

Band saws have a rotating saw band, which should ensure continuous sawing performance. These saws are known for their very clean cut .

An important criterion is a safe stand. Ultimately, this means nothing else that a heavy saw is all the better than a very light model.

Especially with stationary saws, we can often determine a deadweight of up to 100 kg . This is also absolutely necessary for a safe stand .

 In addition, a stable state for providing high vibration levels. If the rotating saw band does not vibrate unnecessarily, the saw cut is all the more precise. With an appropriate ball bearing of the deflection rollers an even smoother belt run can be guaranteed.

First run in the band saw

It is interesting that the saw teeth of an endless saw blade are not always the same size. They can have a slight deviation in height and therefore also in sharpness. In addition, new, sharp teeth are much more susceptible to chipping than slightly truncated saw teeth.

Band saws must first be retracted in order to achieve an even saw run and cut . This also ensures a harmonious saw band guidance. Band saws with a controller for the cutting speed are ideal. To retract a band saw, a piece of wood should be sawn with only 50% of the feed force.

This professional retraction prevents saw teeth from splintering and overall the saw blade is worn more evenly.

 

The saw blades can also be sharpened manually

In order to sharpen a blunt saw blade, the housing of the table band saw that has been switched off must first be opened. The old saw blade can be removed by loosening the deflection rollers. Now the saw blade is clamped lengthways in a vice.

With a fine triangular grinder , the individual teeth can be resharpened with one to two forward and backward movements. It is recommended to grind the tooth base completely and to work out the tooth tips. Understandably, in between we have to loosen the saw blade from the vise and tighten it a bit until we are completely around.

A small tip: Highlight to the beginning of the re-sharpening with a felt-tip pen to start. Then the end is more noticeable.

What about the pulleys of a band saw?

The most important elements of a band saw are the deflection rollers.

An incorrectly adjusted deflection roller is the main cause of the saw blade running unevenly, showing a course or even tearing. The correct setting of the deflection rollers ensures a perfect cutting result and also ensures that the wear is limited.

When using a flange, the band back of the saw blade must not touch it. Otherwise the saw blade could be damaged.

 Always make sure that the teeth of the saw blade run freely and do not touch support. Otherwise the teeth could break off. These special features that must guide rollers are adjusted so that a possible uniform and smooth running is guaranteed.

Wood chips, sawdust and dust often cause these particles to adhere to the coverings of the deflection rollers. This can affect smooth guidance.

Heavily soiled workpieces should be swept off beforehand. It is helpful if a band saw has a suction function so that wood residues are vacuumed off immediately.

If a bearing of a deflection roller is damaged, it must be replaced. This is the only way to ensure that the tape runs correctly.

Use pure metal band saws

There are special band saws that are only suitable for cutting or cutting metal. In this type of model too, the endless saw blade is driven by an electric motor.

A model of this kind may be aluminum, iron, Ku p fer, steel and even stainless steel saw. They are therefore the ideal choice for precision mechanics, metal workshops, but also for model builders. It is important that no wood-based materials or plastics can be sawn with a pure metal band saw. The saw blade is not designed for this.

Band saws for special cases

Some band saws are also used in the food industry and especially in the meat processing industry. This allows cattle and pigs to be divided particularly effectively. Even frozen meat can be sawn very carefully with a saw.

 

Safe use of the saw

Every electric saw has a certain risk of injury. This is no different with band saws. Nevertheless, we would like to make things a little easier for you with the following tips. The following tips are not exhaustive but are intended to point out the most important accident risks.

Place workpieces correctly

A workpiece must always rest securely and firmly on the work table. It becomes difficult with logs since we do not have a proper contact surface here.

If necessary, we can also fix these with screw clamps.

Workpieces that are too small are always problematic. There is a small band saw for model making, but we also have to be careful not to get too close to the saw blade with our hands.

  • Use only clean workpieces
  • Heavily soiled workpieces can contaminate both the saw blade and the band saw itself.
  • Be careful not to accidentally saw into a stuck nail.
  • This would damage pure saw blades for woodworking.

Use a trestle

  • The work table is usually much too small for very long workpieces. An additional trestle, which serves as an additional support on the receiving side of the band saw, is helpful.
  • This not only ensures safety, but ultimately also ensures a clean saw cut. With such a large contact surface, the excessively long workpiece rests securely and can still be pushed in according to the progress of the saw.
  • Always keep a sufficient distance from the saw blade
  • Most of the workpieces are guided to the saw blade with your hands. Always keep a distance of at least 10 cm.
  • It is ideal if you use a push stick that is long enough and offers more security against cuts. Such a push stick is often recommended for other stationary saws, such as a table saw.
  • This allows the workpieces to be brought to the saw from a safe distance.

 

Take breaks

  • A break from work is always important. On the one hand, this ensures that you do not become unconcentrated and on the other hand, the saw blade is not heated excessively.
  • Relax the saw blade
  • After sawing, you should relax the saw blade on the deflection rollers a little.
  • Excessive tension can also affect wear.
  • Personal security equipment
  • Depending on the workpiece to be sawn , it makes sense to wear safety glasses . This prevents splintering wood or metal residues from getting into the eyes.
  • Additional safety precautions apply in commercial workshops. Here users have to wear safety shoes and tight-fitting work clothes.
  • To get a good saw feeling, work gloves are usually not recommended. However, the safety distance to the saw blade must always be maintained.

 

 

Band saw vs. Chop saw

Band and cross-cut saws represent two completely different types of saws . The band saw works with a continuous endless saw blade and is suitable for cross and longitudinal cuts. Depending on the saw model, it can be used to make vertical and horizontal saw cuts. It is advantageous that almost all workpieces can be sawed equally with the right saw blade.

A chop saw belongs to the circular saw. It doesn’t cut too wide workpieces from top to bottom. For example, they are very popular for shortening parquet and laminate. But bars can also be separated easily. In contrast to the band saw, cross-cut saws do not have sufficient feed, for example to saw through a very long workpiece from start to finish.

The advantage of the chop saw is that we can also use it to make practical miter cuts.

 

Useful accessories

When it comes to accessories for band saws , many people think primarily of the replacement of endless saw blades. Of course, these accessories are very important and should always be matched to the respective band saw. As we have already explained above, the saw band length differs from machine to machine.

 But there are other accessories. These include, for example, the interchangeable upper and lower saw blade guides, which only make a precise cut possible. An additional miter fence or a circular cutting device can also be purchased as an option on many models.

Also, quite useful one can rip the fence be pretending precise guidance of the workpiece. In this way, you can comply with the sawing directions you have chosen with particular care. There are work tables on which horizontal and vertical parallel stops can be attached.

Alternatives to the band saw

Band saws can saw workpieces both in length and in width. As alternatives to offer the

  • Hand and table saws,
  • Jigsaws,
  • Saber saws and
  • Scroll saws
  1. With these electric saws you can also saw workpieces in any direction.

The difference to most other electric saws is that they do not have an endless saw blade.

Either a circular saw blade rotates or the saw cut is carried out by an oscillating movement.

Many of these saws cannot be used stationary , but by hand. They are therefore much more compact and easy to use.

 

FAQ

How many different manufacturers do I have in the band saw comparison?

In the band saw comparison, 10 different manufacturers are represented. These are: Atika, Bernardo, Einhell, Holzstar, Makita, Metabo, Proxxo, Record Power, Scheppach and Varo.

What is the price range of the band saw models?

The price range for band saws is very large. While inexpensive models are available from around 100 euros, ambitious woodworkers also spend over 700 euros for a band saw.

Which band saw have previous customers rated particularly well?

The Einhell band saw TC-SB 200/1 is very popular on Amazon for only around 100 euros. 523 buyers rated the band saw with an average of 4.2 stars.

Which band saws are included in the band saw comparison?

The band saw comparison includes the following models: Atika BS 205-2, Bernardo HBS 360, Einhell TC-SB 200/1, Einhell TC-SB 305 U, Holzstar HBS 251, Makita LB1200F, Metabo BAS 261, Proxxon MBS 240 E, Record Power BS250, Scheppach BASA1 and Varo POWX180.

What should you know before buying?

Band saws for processing wood, metal, and plastic are available in various designs and sizes. The size of your usual workpieces is particularly important. Band saws can be inclined at different angles (ideally continuously). In addition to the general height, the blade stabilizer and the blade guard should also be adjustable. Various extras such as a magnifying glass are also practical.

What sources are our grades based on?

The marks of the band saws result from the test results of specialist magazines, which are offset against the customer reviews.

 

Leave a Comment